Interactive engineering workspace · Web-based

CLC Lift Planner 2D

Explore crane geometry in side and top views, check working radius and obstacles, and generate a branded PDF report. All dimensions are metric.

Side & top views Radius & measurements Jib & Superlift PDF report
Start planning

Independent 2D geometry tool. Use the correct manufacturer load chart and an approved lifting plan for capacity verification.

CLC LIFT PLANNERLoad & riggingRadius — · Gross —
Step 1

Lift setup

01

Load & rigging

02

Crane geometry

02A

Crane configuration

Optional manual input. Enter a capacity only after checking the exact crane model, chart edition, boom length, radius and configuration. A percentage comparison does not certify this lift.

Find the corresponding manufacturer load chart ↗

Changes the direction of the carrier cabin in the side drawing; the boom and working geometry do not reverse. In plan view, use turret rotation separately.

03

Placement & clearance

04

Obstacles

Distances are measured from an arbitrary scene origin. Select and drag an obstacle in the drawing to adjust its position.

05

PDF report & project information

Opens the browser's print dialog. Select Save as PDF (or the PDF option on iPhone) to export the branded report. The interactive drawing stays unchanged.

06

Project tools

Live view

2D lift simulation

Engineering side elevation · geometric dimensions

LIVE ENGINEERING WORKSPACE2D geometry · Metric · No automatic capacity certification
Distance toolSelect Measure, then tap two points on the drawing.
Enter coordinates precisely
Loading interactive crane simulation…
BOOM FINE CONTROL41.00 m
Boom angle 57.0°
QUICK ADJUSTFine-tune without opening settings

Radius measured from the centre of slew. Changes automatically adjust the boom angle.

Tap a crane, boom, load or obstacle to select it. Drag the boom tip to change length and angle, drag an obstacle to move it, use the round handles to resize dimensions, or drag an empty area to pan. Pinch with two fingers to zoom. Use “Fit drawing” to recenter the whole scene.

Working radius ⓘ—
Boom tip elevation—
Load bottom elevation—
Gross suspended load—
Chart utilization (manual)Not entered
Nearest 2D separation ⓘ—
●Geometry check—
Calculating…